Hey everyone,

Well, we all make mistakes and I’m certainly no different.  On this page you will find notices of any pattern corrections that are necessary after printing a pattern.

 

Dancing Poppies Quilt Pattern

 

Purely Canadian Quilt Pattern

The first printing of the Purely Canadian Quilt Pattern contains two known errors.  You can distinguish the first printing from subsequent print runs by the lack of a Print Edition Number on the title page of the pattern.

Finished Quilt Size

Finished Quilt Size is 71.5″ x 87.5″

Erratum #1 – Page 19

Red Fabric

Cut SEVEN (7) should read Cut EIGHT (8) 2 ½″ WOF Strips

Erratum #2 – Page 21

Borders

Quilt top measures 70½″ x 84½″ should read 71½″ x 87½″

Inner Border & Delectable Mountains – Step 4

Quilt will measure 56½″ x 70½″ should read 56½″ x 73½″

Outer Borders – Vertical Borders – Step 2

The vertical outer border should measure 70½″.  From this long strip made in step 1 cut TWO (2) strips 70½″ in length.  This should read:  The vertical outer border should measure 73½″.  From this long strip made in step 1 cut TWO (2) strips 73½″ in length.

Erratum #3 – Page 22

Bottom of 1st column

Quilt will measure 70½″ x 84½″ should read 71½″ x 87½″

Erratum #4 – Page 3

Bear’s Paws

Please note that the Bear’s Paws must be made as mirror images to ensure the moose in the centre of the block is the right way up.

Erratum #5 – Page 4

Inukshuk

Step 2: Unit will measure 2″ x 8 ½″ should read 1 ¾″ x 8 ½″.

Erratum #6 – Page 5

Inukshuk

Step 9: Unit will measure 3″ x 8 ½″  should read 3 ¼″ x 8 ½″.

 

Ebb & Flow Quilt

The first printing of the Ebb & Flow pattern has a few known errors. Below are the corrections.

Erratum #1 – 3:  Snail’s Trail Block

Page 3

Step 4 – Should read: Cut FORTY-EIGHT (48) 

Step 4 – graphic caption should read: 1 ¼″ x 2″

Step 6 – Should read: Make FORTY-EIGHT (48)

Page 6

Step 22 – Should read: Make FORTY-EIGHT (48)

Erratum #4 – #7 : Rail Fence Block

Page 6

Step 1 – should read: Make TWELVE (12) not THREE (3)

Step 2 – should read: Make TWELVE (12) not THREE (3)

Step 4 – “Place the ruler with the 4 ½″ line on the….” should read 3 ½″ line on the….

Step 5 – “Lay out the 4 ½″ squares from step 4” should read 3 ½″ squares from step 4

Erratum #8 : Cutting Instructions 

Page 2

Fabric H should read: Cut SIX (6) 2’’ x WOF strip

Fabric I should read: Cut FOUR (4) 2’’ x WOF strip

Fabric J should read: Cut SIX (6) 2’’ x WOF strip

Erratum #9: Fabric Requirements 

Back Cover

Fabric H should read: 0.35 metres or 14 inches

Fabric I should read: 0.25 metres or 10 inches

Fabric J should read: 0.35 metres or 14 inches

 

Peppermint Candy

The first printing of the Peppermint Candy pattern has a few known errors. Below are the corrections.

Erratum #1: Checkerboard Block

Page 3

Step 1 – Should read:  Make TWO (2)

Page 4

Step 2 – Should read: Make ONE (1)

Erratum #2: Sewing the Rows Together

Page 10

Step 5 – Should read: Press the seam towards row 2.

Step 6 – Should read: Press the seam towards row 6.

 

Santa Sac Pattern – All Designs

Erratum #1: Cutting Instructions

Page 1

Casing fabric – Should read cut into TWO (2) strips 4 ½″ x 20″

 

Santa Sac Pattern – Snowman & Snowlady

Erratum #1: Templates

The Snowman & Snowlady templates are not reversed and need to be traced from the backside to be the same as the cover image.

 

Santa Sac Pattern – Snowboy & Snowgirl

Erratum #1: Requirements

Back cover:

Assorted fat quarters for appliqué – Should read white or white on white for body, Christmas prints or colours for clothing and letters

 

Bargello Sunflower

Erratum #1: Making the fabric runs and tube

Page 4

At the end of making the tube after step 4 it should read:

Make a second tube as you did above by repeating the steps in the 7 fabric colour run, 5 fabric colour run and making the tube sections with the remaining A – G strips cut earlier. Cut each tube up as per instructions below to create two full Bargello stratas. Two are needed to cut the petals out of – there will be some left over which could be used to make a small sunflower.

Page 11

Erratum #2: Background and Borders

The background size may need to be trimmed smaller depending on the size of seams when sewing the fusible grid borders together.

I recommend that you

Make the checkerboard border sections first with the fusible grid and then cut the background piece after measuring the border pieces to ensure the correct size is cut so that no trimming is required.

Erratum #3: Page 3

Step 5: The graphic does not match the instructions. It should show piece G being sewn to piece F of the unit made in step 3. 

 

Be Mine

Erratum #1: Cutting Instructions

Page 1

Note: do not cut the border pieces until the centre has been made to ensure proper measurements

Erratum #2: Cutting Instructions

Page 2

Fabric D – Inner Border #2 should read Inner Border #3

Fabric E

• The fabric should be cut along the WOF not the length of fabric to ensure the stripes are in the right direction
• Binding – cut SEVEN (7) 2 ¼″ x WOF strips should read cut FOUR (4) 2 ¼″  X WOF strips

Erratum #3: Making the Heart

Page 4

Note: If using the quilt fuse grid method to make the centre heart it could end up a different size than stated so do not cut the borders until it is made and measured.

 

Criss Crossed

Erratum #1: Requirements

Back Cover

Fabric 2 requirements were a bit too much and have been reduced. The requirements should read as follows:

Crib 0.5 yds (0.4 m)   Lap 0.75 yds (0.6 m)  Single 1.0 yds (0.9 m)  Double 1.3 yds (1.25 m)  Queen 1.75 yds (1.5 m)

 

Geometric Forest

Erratum #1: Requirements

Back Cover

Fabric 5 requirements has the wrong SKU and should read 20393-36 

Erratum #2: Cutting Instructions

Page 2 column 2

Piece BG-20 should read ONE (1) 3″ x 5 ½″ rect

Erratum #3: Putting the Rows Together

Page 7 column 1 step 4

should also read: Square off top and bottom of piece before going onto next step.

 

Chain Link

Erratum #1: Requirements

The amounts for the dark, light and medium fabrics is wrong for the placemats, table runner and small crib size.

Here are the correct amounts.

Placemat – Dark 0.9 m (1.0 yd)  Light 0.5 m (⅔ yd)  Medium 0.3 m (⅓ yd)

Table Runner – Dark 0.6 m (¾ yd)  Light 0.3 m (⅓ yd)  Medium 0.3 m (⅓ yd)

Small Crib – Dark 0.9 m (1.0 yd)  Light 0.4 m (½ yd)  Medium 0.6 m (¾  yd)

 

Monet’s Garden

Erratum #1: Page 2

Making the blocks chart.  The bed runner should read 10 setting triangles.

Erratum #2: Cutting Instructions – Queen

Piece D (Fabric 3)

Should read:  Cut FOUR (4) 2″ x WOF strips; sub cut THIRTY-TWO (32) 2″ x 4 ½″ rects

Erratum #3: Fabric Requirements – Double

Fabric 1

Should read:  7/8 yard (0.8 m)

Erratum #4: Cutting Instructions 

Erratum #4 – Cutting Instructions

Queen Size – Corner Triangles

Piece V (Fabric 5) Should read: Cut ONE (1) 2″ x WOF strips; sub cut FOUR (4) 2″ x 10 ½″ rects

Piece W (Fabric 6) Should read: Cut TWO (2) 2″ x WOF strips; sub cut FOUR (4) 2″ x 12 ½″ rects

Piece X (Fabric 7) Should read: Cut TWO (2) 2″ x WOF strips; sub cut FOUR (4) 2″ x 14 ½″ rects

Double & Bed Runner Size – Corner Triangles

Piece V (Fabric 5) Should read: Cut ONE (1) 1 ⅝″ x WOF strips; sub cut FOUR (4) 1 ⅝″ x 8″ rects

Piece W (Fabric 6) Should read: Cut ONE (1) 1 ⅝″ x WOF strips; sub cut FOUR (4) 1 ⅝″ x 9″ rects

Piece X (Fabric 7) Should read: Cut TWO (2) 1 ⅝″ x WOF strips; sub cut FOUR (4) 1⅝″ x 11½″ rects

Throw Size – Corner Triangles

Piece V (Fabric 5) Should read: Cut ONE (1) 1 ¼″ x WOF strips; sub cut FOUR (4) 1 ¼″ x 6 ½″ rects

Piece W (Fabric 6) Should read: Cut ONE (1) 1 ¼″ x WOF strips; sub cut FOUR (4) 1 ¼″ x 7 ½″ rects

Piece X (Fabric 7) Should read: Cut ONE (1) 1 ¼″ x WOF strips; sub cut FOUR (4) 1 ¼″ x 8 ½″ rects

 

Follow the Arrow

Erratum #1: Cutting instructions insert

Background fabric for Lap size should read cut Eighteen 8″ squares

 

Ornament Trivet

Erratum #1: Cutting instructions 

Piece 1b: should read  Cut 2″x 2 ½″ 

 

Dazzle

Erratum #1: Fabric Requirements – back cover

Fabric #5 (reindeer)

Border Option 2 should read 1.0 yd (0.9 m)

Border Option 3 should read 3/4 yd (0.7 m)

Fabric #6 (cream)  should read 1.25 yd (1.2 m)

Erratum #2: Cutting Instructions 

Page 1

Fabric 1 – stars

Should read Cut FOUR (4) 2 ½″ x WOF strips for coping strips

Fabric 5 – reindeer

Piece T: Border Option #2 – Should read Cut FOUR (4) 6 ½″ x length of fabric strips along the selvedge

Border Option #3 – Should Read Cut TWO (2) 11″ x WOF strips; sub cut into:

• Piece U: EIGHT (8) 6 ½″ x 11″ rects

Fabric 6 – cream – background

Piece V: Border Option #3 – Should read Cut TWO (2) 2 ¾″ x WOF strips

Erratum #3: Sewing the Strip Sections

Page 2

A total of 4 strip sections are needed – 2 for the top and 2 for the bottom of the panel. In the first printing of the pattern I said make 4 but it should read Make FOUR (4) total – Make TWO (2) of layout #1 and TWO (2) of layout #2 which is a mirror image of layout #1. See diagram below.

If you require further help please email me at jennifer@quiltsbyjen.ca

Square Dance

Erratum #1: Fabric Requirements – back cover

Fabric Requirements

Fabric 2 – blue/purple curved lines

• large size: should read 1 2/3 yd (1.5 m)

Fabric 3 – dark purple with dot lines

• large size: should read 1 yd (0.9 m)
• small size: should read 1/2 yd (0.4 m)

Fabric 8 – light purple with dot lines

• large size: should read 3/4 yd (0.6 m)
• small size: should read 1/2 yd (0.4 m)

Erratum #2: Cutting Instructions

The Block

Sections 1 & 5 

Fabric 1 – light blue tone on tone (background) – should read as follows

• Piece C – Cut 2 [1] 4 ½″ x WOF strips; sub cut into 36 [16] 1 ½″ x 4 ½″ rects
• Piece D – Cut 4 [2] 4 ½″ x WOF strips; sub cut into 72 [32] 2″ x 4 ½″ rects
• Piece R – Cut 6 [3] 1 ½″ x WOF strips; sub cut into 36 [16] 1 ½″ x 6 ½″ rects

Fabric 2 – blue/purple with curved lines – should read as follows

• Piece A – Cut 9 [5] 3 ½″ x WOF strips
• Fabric 3 – dark purple with dot lines
• Piece B – Cut 9 [5] 1 ½″ x WOF strips

Section 2

Fabric 1 – light blue tone on tone (background) – should read as follows

• Piece D – Cut 2 [1] 4 ½″ x WOF strips; sub cut into 36 [16] 2″ x 4 ½″ rects

Erratum #3: Page 2 – Section 1

step 1 – should read as follows

1. Sew fabric strips A & B together. Press the seam towards strip B. Make 9 [5] total.

step 2 – should read as follows

1. Square off one end of a strip set made in step 1 and sub cut the strip into 4 ½″ x 5″ rects.  Graphic should also read 4 ½″ x 5″ rectangles.

Erratum #4: Page 8 – Pieced border 

should read as follows

right hand column – step 9 should be before step 8

 

Strata 

Erratum #1:

Cutting Instructions for wall hanging – page 1

The following ‘C’ pieces should be cut as follows:

1C – 2 ½″ x 17 ¾″ 

2C – 2 ½″ x 20 ¼″ 

6C – 2 ½″ x 17 ¼″ 

7C – 2 ½″ x 20″ 

12C – 2 ½″ x 20 ½″

17C – 2 ½″ x 15 ¾″

 

Charmed 

Cutting Instructions – Lap Size

Add to cutting:  Piece G1 – Cut EIGHT (8) 2 ½″ x 4 ½″ rectangles – these are for the pieced border

Piece H should read: Cut EIGHT (8) 2 ½″ x 31″ strips – for lap & crib size

Page 1

Lap Size should read: 45 ½″ x 63 ½″ 

Page 4

Step 7 in right hand column should read: Cut the remaining J strips

Page 3

Step 12 last sentence should read: Rows will measure 2 ½″ x 31″.

Page 5

Step #7 in left hand column should read: Sew a piece G1

Step #5 in right hand column should read: Sew a piece G1

Page 6 – Outer Borders 

should read as follows:

1. Cut two outer border strips in half to measure 2 ½″ x 20″. 
2. Sew the four strips from step 1 to one end of each of the remaining outer border strips. Press seam in either direction. Make 4.
3. Follow steps 4 – 8 on page 4 for the inner border to make the outer border. Vertical borders should measure 59 ½″ and horizontal borders should measure 45 ½″. Quilt top to measure 45 ½″ x 63 ½″.

Merging Traffic

Cutting Instructions – Lap Size

Please use these measurements for the following pieces in the lap size quilt

Row 4
Piece D1 – ONE (1) – 5½″ x 10″
Piece D3 – ONE (1) – 5½″ x 19″

Row 9
Piece I1 – ONE (1) – 5½″ x 15″
Piece I3 – ONE (1) – 5½″ x 14″

Row 10
Piece J1 – ONE (1) – 5½″ x 10″
Piece J3 – ONE (1) – 5½″ x 19″

Row 11
Piece K1 – ONE (1) – 5½″ x 15″
Piece K3 – ONE (1) – 5½″ x 24″

Row 12
Piece L1 – ONE (1) – 5½″ x 10″
Piece K3 – ONE (1) – 5½″ x 19″

Neon Galaxy

Erratum #1 – posted August 29, 2022

Page 7, Step 3 – should read as follows: Units will measure 2 1⁄2′′ x 20 1⁄2′′.

Intertwined

Erratum #1 – posted September 2, 2022

Page 6 – second column

Section 4 – Make 10:  should read as follows:  4 – Unit X and 6 – Unit Y

Section 5 – Make 2:  should read as follows:    2 – Unit X only

Section 6 – Make 2:  should read as follows:    2 – Unit X only

Page 7 – first column

Section 7 – Make 2:  should read as follows:    2 – Unit X only

Section 8 – Make 2:  should read as follows:    2 – Unit Y only

Section 9 – Make 2:   should read as follows:   2 – Unit Y only

Fabric Requirements for Intertwined – Changes to the first 3 fabrics as follows in chart below – all based on 40″ wide fabric

Fabric	Placemats – makes 4 20” x 14”	Table Runner48” x 20”
Fabric 1 – grey SKU 9030-96	⅔ yd (0.6 m)	⅜ yd (0.35 m)
Fabric 2 – orange SKU 24767-55	⅝ yd (0.5 m)	⅜ yds (0.35 m)
Fabric 3 – black cat eyesSKU 24770-99(includes binding)	1 ⅛ yd (1.1 m)	¾ yd (0.7 m)
Fabric 4 – cream/blackSKU 24769-11	N/A	⅜ yds (0.35 m)
Fabric 5 – pumpkins SKU 24765-99	⅓ yd (0.3 m)	⅓ yd (0.3 m)
Backing – black cat eyesSKU 24770-99	1 ⅓ yds (1.3 m)	1 ½ yds (1.4 m)
Batting	4 pieces 24 x 18	1 piece 52 x 24